arduino/libraries/FirmataWithDeviceFeature/src-features/I2CFirmata.h

/*
  I2CFirmata.h - Firmata library
  Copyright (C) 2006-2008 Hans-Christoph Steiner.  All rights reserved.
  Copyright (C) 2010-2011 Paul Stoffregen.  All rights reserved.
  Copyright (C) 2009 Shigeru Kobayashi.  All rights reserved.
  Copyright (C) 2013 Norbert Truchsess. All rights reserved.
  Copyright (C) 2009-2016 Jeff Hoefs.  All rights reserved.

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.

  See file LICENSE.txt for further informations on licensing terms.

  I2CFirmata.cpp has been merged into this header file as a hack to avoid having to
  include Wire.h for every arduino sketch that includes ConfigurableFirmata.

  Last updated by Jeff Hoefs: January 23rd, 2015
*/

#ifndef I2CFirmata_h
#define I2CFirmata_h

#include <Wire.h>
#include <ConfigurableFirmata.h>
#include "FirmataFeature.h"
#include "FirmataReporting.h"

#define I2C_WRITE                   B00000000
#define I2C_READ                    B00001000
#define I2C_READ_CONTINUOUSLY       B00010000
#define I2C_STOP_READING            B00011000
#define I2C_READ_WRITE_MODE_MASK    B00011000
#define I2C_10BIT_ADDRESS_MODE_MASK B00100000
#define I2C_END_TX_MASK             B01000000
#define I2C_STOP_TX                 1
#define I2C_RESTART_TX              0
#define I2C_MAX_QUERIES             8
#define I2C_REGISTER_NOT_SPECIFIED  -1

/* i2c data */
struct i2c_device_info {
  byte addr;
  int reg;
  byte bytes;
  byte stopTX;
};

class I2CFirmata: public FirmataFeature
{
  public:
    I2CFirmata();
    boolean handlePinMode(byte pin, int mode);
    void handleCapability(byte pin);
    boolean handleSysex(byte command, byte argc, byte* argv);
    void reset();
    void report();

  private:
    /* for i2c read continuous more */
    i2c_device_info query[I2C_MAX_QUERIES];

    byte i2cRxData[32];
    boolean isI2CEnabled;
    signed char queryIndex;
    unsigned int i2cReadDelayTime;  // default delay time between i2c read request and Wire.requestFrom()

    void readAndReportData(byte address, int theRegister, byte numBytes, byte stopTX);
    void handleI2CRequest(byte argc, byte *argv);
    boolean handleI2CConfig(byte argc, byte *argv);
    boolean enableI2CPins();
    void disableI2CPins();
};


/*
 * I2CFirmata.cpp
 * Copied here as a hack to avoid having to include Wire.h in all sketch files that
 * include ConfigurableFirmata.h
 */

I2CFirmata::I2CFirmata()
{
  isI2CEnabled = false;
  queryIndex = -1;
  i2cReadDelayTime = 0;  // default delay time between i2c read request and Wire.requestFrom()
}

void I2CFirmata::readAndReportData(byte address, int theRegister, byte numBytes, byte stopTX) {
  // allow I2C requests that don't require a register read
  // for example, some devices using an interrupt pin to signify new data available
  // do not always require the register read so upon interrupt you call Wire.requestFrom()
  if (theRegister != I2C_REGISTER_NOT_SPECIFIED) {
    Wire.beginTransmission(address);
    Wire.write((byte)theRegister);
    Wire.endTransmission(stopTX); // default = true
    // do not set a value of 0
    if (i2cReadDelayTime > 0) {
      // delay is necessary for some devices such as WiiNunchuck
      delayMicroseconds(i2cReadDelayTime);
    }
  } else {
    theRegister = 0;  // fill the register with a dummy value
  }

  Wire.requestFrom(address, numBytes);  // all bytes are returned in requestFrom

  // check to be sure correct number of bytes were returned by slave
  if (numBytes < Wire.available()) {
    Firmata.sendString("I2C: Too many bytes received");
  } else if (numBytes > Wire.available()) {
    Firmata.sendString("I2C: Too few bytes received");
  }

  i2cRxData[0] = address;
  i2cRxData[1] = theRegister;

  for (int i = 0; i < numBytes && Wire.available(); i++) {
    i2cRxData[2 + i] = Wire.read();
  }

  // send slave address, register and received bytes
  Firmata.sendSysex(SYSEX_I2C_REPLY, numBytes + 2, i2cRxData);
}

boolean I2CFirmata::handlePinMode(byte pin, int mode)
{
  if (IS_PIN_I2C(pin)) {
    if (mode == PIN_MODE_I2C) {
      // the user must call I2C_CONFIG to enable I2C for a device
      return true;
    } else if (isI2CEnabled) {
      // disable i2c so pins can be used for other functions
      // the following if statements should reconfigure the pins properly
      if (Firmata.getPinMode(pin) == PIN_MODE_I2C) {
        disableI2CPins();
      }
    }
  }
  return false;
}

void I2CFirmata::handleCapability(byte pin)
{
  if (IS_PIN_I2C(pin)) {
    Firmata.write(PIN_MODE_I2C);
    Firmata.write(1); // TODO: could assign a number to map to SCL or SDA
  }
}

boolean I2CFirmata::handleSysex(byte command, byte argc, byte *argv)
{
  switch (command) {
    case I2C_REQUEST:
      if (isI2CEnabled) {
        handleI2CRequest(argc, argv);
        return true;
      }
    case I2C_CONFIG:
      return handleI2CConfig(argc, argv);
  }
  return false;
}

void I2CFirmata::handleI2CRequest(byte argc, byte *argv)
{
  byte mode;
  byte stopTX;
  byte slaveAddress;
  byte data;
  int slaveRegister;
  mode = argv[1] & I2C_READ_WRITE_MODE_MASK;
  if (argv[1] & I2C_10BIT_ADDRESS_MODE_MASK) {
    Firmata.sendString("10-bit addressing not supported");
    return;
  }
  else {
    slaveAddress = argv[0];
  }

  // need to invert the logic here since 0 will be default for client
  // libraries that have not updated to add support for restart tx
  if (argv[1] & I2C_END_TX_MASK) {
    stopTX = I2C_RESTART_TX;
  }
  else {
    stopTX = I2C_STOP_TX; // default
  }

  switch (mode) {
    case I2C_WRITE:
      Wire.beginTransmission(slaveAddress);
      for (byte i = 2; i < argc; i += 2) {
        data = argv[i] + (argv[i + 1] << 7);
        Wire.write(data);
      }
      Wire.endTransmission();
      delayMicroseconds(70);
      break;
    case I2C_READ:
      if (argc == 6) {
        // a slave register is specified
        slaveRegister = argv[2] + (argv[3] << 7);
        data = argv[4] + (argv[5] << 7);  // bytes to read
      }
      else {
        // a slave register is NOT specified
        slaveRegister = I2C_REGISTER_NOT_SPECIFIED;
        data = argv[2] + (argv[3] << 7);  // bytes to read
      }
      readAndReportData(slaveAddress, (int)slaveRegister, data, stopTX);
      break;
    case I2C_READ_CONTINUOUSLY:
      if ((queryIndex + 1) >= I2C_MAX_QUERIES) {
        // too many queries, just ignore
        Firmata.sendString("too many queries");
        break;
      }
      if (argc == 6) {
        // a slave register is specified
        slaveRegister = argv[2] + (argv[3] << 7);
        data = argv[4] + (argv[5] << 7);  // bytes to read
      }
      else {
        // a slave register is NOT specified
        slaveRegister = (int)I2C_REGISTER_NOT_SPECIFIED;
        data = argv[2] + (argv[3] << 7);  // bytes to read
      }
      queryIndex++;
      query[queryIndex].addr = slaveAddress;
      query[queryIndex].reg = slaveRegister;
      query[queryIndex].bytes = data;
      query[queryIndex].stopTX = stopTX;
      break;
    case I2C_STOP_READING:
      byte queryIndexToSkip;
      // if read continuous mode is enabled for only 1 i2c device, disable
      // read continuous reporting for that device
      if (queryIndex <= 0) {
        queryIndex = -1;
      } else {
        queryIndexToSkip = 0;
        // if read continuous mode is enabled for multiple devices,
        // determine which device to stop reading and remove it's data from
        // the array, shifiting other array data to fill the space
        for (byte i = 0; i < queryIndex + 1; i++) {
          if (query[i].addr == slaveAddress) {
            queryIndexToSkip = i;
            break;
          }
        }

        for (byte i = queryIndexToSkip; i < queryIndex + 1; i++) {
          if (i < I2C_MAX_QUERIES) {
            query[i].addr = query[i + 1].addr;
            query[i].reg = query[i + 1].reg;
            query[i].bytes = query[i + 1].bytes;
            query[i].stopTX = query[i + 1].stopTX;
          }
        }
        queryIndex--;
      }
      break;
    default:
      break;
  }
}

boolean I2CFirmata::handleI2CConfig(byte argc, byte *argv)
{
  unsigned int delayTime = (argv[0] + (argv[1] << 7));

  if (delayTime > 0) {
    i2cReadDelayTime = delayTime;
  }

  if (!isI2CEnabled) {
    enableI2CPins();
  }
  return isI2CEnabled;
}

boolean I2CFirmata::enableI2CPins()
{
  byte i;
  // is there a faster way to do this? would probaby require importing
  // Arduino.h to get SCL and SDA pins
  for (i = 0; i < TOTAL_PINS; i++) {
    if (IS_PIN_I2C(i)) {
      if (Firmata.getPinMode(i) == PIN_MODE_IGNORE) {
        return false;
      }
      // mark pins as i2c so they are ignore in non i2c data requests
      Firmata.setPinMode(i, PIN_MODE_I2C);
      pinMode(i, PIN_MODE_I2C);
    }
  }

  isI2CEnabled = true;

  Wire.begin();
  return true;
}

/* disable the i2c pins so they can be used for other functions */
void I2CFirmata::disableI2CPins()
{
  isI2CEnabled = false;
  // disable read continuous mode for all devices
  queryIndex = -1;
  // uncomment the following if or when the end() method is added to Wire library
  // Wire.end();
}

void I2CFirmata::reset()
{
  if (isI2CEnabled) {
    disableI2CPins();
  }
}

void I2CFirmata::report()
{
  // report i2c data for all device with read continuous mode enabled
  if (queryIndex > -1) {
    for (byte i = 0; i < queryIndex + 1; i++) {
      readAndReportData(query[i].addr, query[i].reg, query[i].bytes, query[i].stopTX);
    }
  }
}

#endif /* I2CFirmata_h */